1. Safety warnings
Carefully read the safety warnings before you operate the unit.
The present ultrasonic cleaning unit has been designed for the ultrasonic treatment of items and liquids only.
The unit must be operated by instructed staff; observe and follow the operating instructions.
Risk of electrocution!
Connect the unit to a grounded shock-proof socket only!
Do not open the unit! Opening of the unit by specialized staff only!
For operation place the unit on a dry and stable work place!
Do not immerse or rinse the unit with water!
Pull the mains plug in case of any malfunctions, if humidity might have entered the unit inside, for maintenance purposes and after use.
Risk of fire and explosion!
Do not operate the unit with flammable cleaning media!
Risk of damage to the transducer tank!
Do not put any acids (HCl, etc) or chlorides into the stainless-steel tank!
Do not place any items directly on the tank floor!
Risk of burning and scalding!
Tank, housing and cleaning liquid can heat up considerably, particularly if operated with heating!
In permanent operating mode temperatures exceeding 80 ° C can be reached.
Avoid sound transmission to the operating staff!
Do not reach inside the cleaning liquid or touch sound-carrying parts (tank, basket, cleaning items, etc.) during operation.
Noise emission!
Ultrasonic units can produce annoying sounds.
Wear personal ear protection devices when working close to an ultrasonic unit which is operated without cover.
Emission data for operation with cover: < 70dBAU.
Exclusion of liability: The manufacturer cannot be held liable for damages on persons, equipment or cleaning items caused by improper
§
use and non-observance of the Operating Instructions. The operator is responsible for the instruction of the operating staff.
For any queries please contact your supplier or the manufacturer.
SMEG_VU_GB_Rev0
+ English +
1