HAMPTON BAY 51332 Guía De Uso Y Cuidado página 7

Assembly - Hanging the Fan
1
Attaching the fan to the electrical
box
□
Turn the power off.
□
Securely attach the mounting plate (A) to the outlet box (FF)
using the two screws (GG) supplied with the outlet box (FF).
Pull the 120-volt supply wires (the black, white and ground
wires) out of the outlet box (FF) and through the hole in the
mounting plate (A) and lay them to the side.
NOTE: For better fan performance, make sure the
mounting plate is level. Additional washers (HH)
(not included) may be needed to insert between
the outlet box and mounting plate.
2
Hanging the fan-motor assembly
□
FF
HH
A
GG
□
7
Carefully lift the fan-motor assembly (C) and engage
the slot in the motor bracket on the top of the fan-
motor assembly (C) with the hook on the mounting
plate (A) so that it is securely suspended. Then
connect the wiring to your fan according to step 3
"Making the Electrical Connections".
Once wiring is completed, lift the motor bracket on
the top of the fan-motor assembly (C) so that the
threaded studs (II) on the mounting plate (A) pro-
trude through the slot in the motor bracket. Securely
tighten the three locknuts (BB) onto the threaded
studs (II), then try to shake the fan-motor assembly
(C) to ensure that the assembly is tight.
BB
Please contact 1-855-HD-HAMPTON for further assistance.
C
A
C
HAMPTONBAY.COM