Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Dimensional Clearances
Refer to Figure 2 for recommended dimensional
clearances.
40"
(1016 mm)
29-1/2"
(749 mm)
Machine Foundation
The machine may be placed on any level floor as long
as floor will hold the weight of the machine.
Position the machine and level with shims or grout
under the corners.
Refer to Table 1 for static loads on the floor.
Floor Load Data
Specification
Static floor load, lbs (kN)
2
Static pressure, lbs-ft
2
(kN-m
)
Table 1
F232113
Installation
6"
(152 mm)
Figure 2
UM100
UM202
643 (2.9)
840 (3.7)
78.5 (3.8)
68 (3.3)
1/2"
(13 mm)
Machine Anchoring
Bolting to floor is optional. To bolt down the machine,
use 3/8" bolt holes located on the frame at the bottom
of each corner. One quarter inch machine anchors
should be used.
6"
(152 mm)
U141I
11
Publicidad
Capítulos
Tabla de contenido
