Washing Clothes Using The Cycle Selector; Atc (Auto Temperature Control) - Samsung WA50M7450A Serie Manual Del Usuario

washing a load of laundry

Washing clothes using the cycle selector

Your new washing machine makes washing clothes easy, using Samsung's "Fuzzy Control"
automatic control system. When you select a wash program, the machine will set the correct
temperature, washing time, and washing speed.
1. Press the Power button.
2. Open the lid.
3. Load the articles of clothing one at a time loosely into the drum, without overfi lling it.
4. Add liquid (or powder) detergent, softener, and/or bleach (if necessary) to the appropriate
compartments. See pages 24~26.
5. Close the lid.
6. Use the Cycle Selector to select the appropriate cycle according to the type of material:
NORMAL, HEAVY DUTY, COLORS/DARKS, BEDDING, DELICATES,
PRESS, ACTIVE WEAR, QUICK WASH, SPIN, RINSE+SPIN. The relevant indicators will
illuminate on the control panel.
7. At this time, you can control the wash temperature, the number of rinse cycles, the spinning
speed, and the delay time by pressing the appropriate option button.
8. Press the Start/Pause button on the Cycle Selector and the wash will begin. The process
indicator will light up and the remaining time for the cycle will appear in the display.
Pause Option
To remove or add laundry items, follow these steps:
1. Press the Start/Pause button to unlock the lid.
The lid cannot be opened when the water is too HOT.
2. Remove or add laundry items.
3. Close the lid, and then press the Start/Pause button to restart the wash.
If you have Child Lock on, you must deactivate it fi rst. See page 20.
When the cycle is fi nished:
After the total cycle has fi nished, the power will turn off automatically.
1. Open the lid.
2. Remove laundry.

ATC (AUTO TEMPERATURE CONTROL)

ATC is the control function that the washer controls water temperature with temperature sensor (thermistor).
Because there are numerous water temperatures depending on the customer's environments (cold
areas, warm areas, various water temperatures, settings of heater temperature, etcs.), ATC function in
our washer maintains the certain level of wash temperature to output the best washing performance at
each cycle.
If you select normal & heavy duty cycles, those cycles are the regulation and UL cycle. Since new
washer must reduce the amount of energy usage at fi rst priority, customer will notice more cold water
entering the washer. But This is Normal, not a problem.
In those regulation cycles, Hot temperature is similar to acceptable adult bath-water temperature and
warm temperature is similar to comfortable swimming-pool water temperature.
If customers want to wash clothes in specifi c water temperature, customers should choose a diff erent
cycle at each temperature (Hot/Warm/Eco Warm)
WA7000M-03774A-00_EN+CFR+MES.indb 24 WA7000M-03774A-00_EN+CFR+MES.indb 24
English - 24
, PERM
WATERPROOF
11/18/2016 12:59:12 PM 11/18/2016 12:59:12 PM