Self Clean - Samsung WA50M7450A Serie Manual Del Usuario

maintaining your washer

SELF CLEAN

Self Clean is a self-cleaning cycle that removes mold that may
occur inside the washing machine.
1. Press the Power button.
2. Select the Self Clean cycle.
• Once the Self Clean cycle is selected, the only
function that can be set is Delay End.
3. Press the Start/Pause button.
• If you press the Start/Pause button, Self Clean
begins.
• Using Self Clean, you can clean the drum without using a
cleansing agent.
CAUTION
• Never use Self Clean when laundry is in the washing
machine. This may cause damage to the laundry or a
problem with the washing machine.
The Self Clean Auto Indicator Function
• If the "Self Clean" indicator is lit after a wash, it indicates
that tub (drum) cleaning is required. In this case, remove
the laundry from the washing machine, turn the power on,
and clean the drum by running Self Clean.
• If you do not run Self Clean, the "Self Clean" indicator
turns off . However, the "Self Clean" indicator will light
again after two washes. Not running Self Clean at this point
will not cause a problem with the washing machine.
• Although the Self Clean Auto Indicator appears once a
month or so, the frequency may diff er depending on the
number of times the washing machine is used.
WA7000M-03774A-00_EN+CFR+MES.indb 30 WA7000M-03774A-00_EN+CFR+MES.indb 30
WA50M7450A*
WA45M7050A*
English - 30
WA50M7450A*
WA45M7050A*
11/18/2016 12:59:13 PM 11/18/2016 12:59:13 PM