Numark MP302 Manual De Inicio Rápido Del Usuario página 4

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

1.
PAUSE: This shows when the unit is paused.
2.
PLAY: The shows when a CD is playing.
3.
CUE: Flashing when the unit is setting a cue point.
Lit continuously when the unit is paused at a cue
point.
4.
PROGRAM: Used for pre-programming the track
order to automatically be played by the unit. This is
a great function if you need to leave the CD player
alone.
5.
TIME MODE: (Elapsed) is for showing time as it is
taking place.(Remain) shows how much time is left
on a particular track. This function is controlled by
the TIME BUTTON.
6.
TIME BAR: Shows either time remaining or
elapsed depending on the setting of the TIME
BUTTON.
7.
TRACK NUMBER: Shows the current track number.
While searching folders, this shows "F".
8.
TRACK: Shows when unit is in Track List mode
instead of Folder mode.
PLAY & CUE
Press "PLAY/PAUSE"
Pressing the "PLAY/PAUSE" button starts the disc. Pressing the "CUE" button will reset the disc to the last place where the disc was
started. This is called the cue point. By alternately pressing the "PLAY/PAUSE" button and the "CUE" button, the disc may be returned
and played from the cue point any number of times. This function is called back cue.
PLAY, PAUSE & CUE
Press "PLAY/PAUSE"
to start music
When play has been paused and then started again, the return position for the back cue will be updated to this new position.
LCD DISPLAY FEATURES
PLAY / PAUSE & CUE OPERATIONS
to start music
Play Interval
Back Cue Operation
Press "PLAY/PAUSE"
to pause music
Play Interval
9.
SINGLE: Shows when the unit is set to play just
one track at a time. When this is not lit, the CD will
play continuously through all tracks. This function is
controlled by the SING/CONT BUTTON.
10.
MP3: Shows when unit is playing an MP3 file.
11.
MINUTES: Shows the minutes elapsed or
remaining depending on mode setting.
12.
SECONDS: Shows the seconds elapsed or
remaining depending on mode setting.
13.
FRAMES: The CD Player breaks down a second into
75 frames for accurate cueing. This shows the
frames elapsed or remaining depending on mode
setting.
14.
LOOP: Indicates when loop is actively playing.
15.
PITCH: Shows the percentage change in pitch.
16.
PITCH: Is lit when the PITCH BUTTON is active.
17.
MATRIX DISPLAY: Displays CD Text or MP3 Tag
information. If reading a disc with no encoding,
display will read "NO TEXT". Also displays folder
names while searching through folders.
Press "CUE" return to
last starting point
Position on Disc
Press "PLAY/PAUSE"
to start music
Play Interval
Back Cue Operation
4
Press "CUE" return to
last starting point
Position on Disc

Publicidad

Tabla de contenido
loading

Tabla de contenido