Recalibration Service; Care, Maintenance & Cleaning - HoMedics BPS-050 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

RECALIBRATION SERVICE

All digital blood pressure monitors require recalibration
in order to ensure continued accuracy.
This monitor does not require recalibration for 2 years
under normal usage conditions (approximately 3 times
per day), at which time your monitor will display "
The unit should also be recalibrated if the monitor sus-
tains damage due to blunt force (such as dropping) or
exposure to fluids or extreme hot or cold temperature
changes.
Please fill in date of first use
(Recalibration is recommended after 2 years.)
To send monitor for recalibration, please ship to the
address below with check or money order in the amount
of $10 payable to HoMedics, Inc. for recalibration service
and shipping & handling:
HoMedics Recalibration Service Center
P .O. Box 7050
Walled Lake, MI 48390
Allow up to 3 weeks for return of product. For additional information,
contact HoMedics Consumer relations at 1-800-466-3342.
25
CARE, MAINTENANCE & CLEANING
1. Do not disconnect the tubing or remove the infla-
tion bulb from the arm cuff.
2. Clean the blood pressure monitor body and cuff
carefully with a slightly damp, soft cloth. Do not
press. Do not wash cuff or use chemical cleaner
".
on it. Never use thinner, alcohol or petrol (gaso-
line) as cleaner.
3. Leaky batteries can damage the unit. Remove
the batteries when the unit will not be used for
a long time.
4. If the unit is stored near freezing, allow it to
acclimate to room temperature before use.
5. This blood pressure monitor is not field service-
able. You should not use any tool to open the
device nor should you attempt to adjust anything
inside the device. If you have any problems with
this device, please contact HoMedics Consumer
Relations (contact information can be found on
the warranty page).
6. Do not immerse the unit in water as this will
result in damage to the unit.
26

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido