ghd flight Manual De Instrucciones página 4

VARIABLE VOLTAGE
USA
Your ghd flight is fitted with a dual voltage selector (Fig.1).
To use this feature simply insert a coin to switch the
ghd flight to accept the required incoming voltage i.e. 120V
or 240V.
For use in the USA or Canada, the voltage selector
switch should be placed in the 120 volt position.
For use in several countries overseas, the voltage
selector may need to be placed in the 240 volt
position. Confirm the voltage available at each
overseas location before using the appliance. For
connection to a 240 volt supply, use an attachment
plug adaptor of the proper configuration for the
power supply receptacle. If in doubt consult
a qualified person.
Your ghd flight should only be repaired using specialist tools and by qualified
experts at ghd.
Not to be reproduced
1. This product is intended for household use only.
2. This appliance has a polarized plug (one blade is wider than the other).
As a safety feature, this plug will fit in a polarized outlet only one way. If
the plug does not fit fully in the outlet, reverse the plug. If it still does not
fit, contact a qualified electrician. Do not attempt to defeat this safety
feature.
3. After washing your hair, towel-dry it thoroughly.
4. Do not allow excess water from your hair or any other source to come
into contact with the ghd hairdryer.
5. Use the selector switch, to set the fan speed and the drying temperature:
= Off = Cool
6. For fast drying, use the ghd flight without the styling nozzle.
7. Never cover the blower or intake opening.
8. Ensure that the air inlet filter is or does not become blocked with fluff
or hair.
9. When drying or styling, do not allow any of your hair to cover or come
into contact with the air inlet grill at the back of your dryer.
3
Figure 1
Figure 1
Dual Voltage Dual Voltage
Selector
Selector
= Medium = High
Application Leakage Circuit Interrupter
Your appliance is equipped with an Application Leakage Circuit Interrupter (ALCI)
protection device that may make the appliance inoperable under some abnormal
conditions (such as immersion of the appliance). To ensure that the ALCI plug is
functioning correctly the following test can be performed:
1. Plug in your appliance and press the yellow test button on the plug.
2. This will cause the appliance to stop working.
3. To reset the appliance press the red reset button.
Every time you use your appliance you should check that the ALCI protection
device functions correctly.
If the appliance does not function it must be discarded or returned to an approved
ghd retailer, or you should contact ghd Professional, North America Inc.
at 877-GHD-ANGEL (1-87-443-2643) for further instructions.
4