INOPERABLE PRODUCT
•
Verify that you do not interchange the burner hoses for the flow and return
lines.
Failure to follow these instructions can result in equipment damage.
5.4
Pressure test
Verify that the product is not included in the pressure test.
5.5
Pressure loss
The product allows you to use a great variety of filter inserts. See the diagram
for the resulting pressure losses.
5.5.1
In suction mode with clean filter insert
Mounting
NOTICE
A
B
D
C
Flow rate Q [l/h]
A. Sintered plastic insert
35 μm
B. Sintered plastic insert
50 μm
C. Sintered plastic insert
70 μm
D. Felt
E. Steel sieve
FloCo-Top-1K
EN
14