After Use; Instructions For Cleaning - Blaupunkt PG3000 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

NOTE - An even movement of the spray gun results in an even spray.
Keep your wrist straight and parallel to the surface. lf you bend your wrist or arm while painting, the angle of the spray
may lead to a heavy paint formation in certain areas, resulting in an uneven finish.
TIP - Never spray the container completely empty, when the suction tube no longer immerses in the spray material, air
bubbles will be created causing a break in the flow from the jet spray, resulting in an uneven spray pattern.
Do not flex your wrist while spraying

AFTER USE

For use with inflammable solvents - must have a flashpoint above 70ºF (21ºC).
What is a flashpoint? The flashpoint of a volatile material is the lowest temperature at which it can vaporise to form an
ignitable mixture in air.
Proper cleaning is required for flawless operation of the Sprayer. Improper or lack of cleaning voids warranty claims.
DO NOT clean the spray gun with inflammable solvents.
ALWAYS clean the spray gun and container with the respective diluting agent (paint thinner or water) for the spray
material being used.
DO NOT use any cleaning or thinning solvents or lubricants containing silicone - these are not compatible with the
spray gun.
DO NOT SUBMERGE THE SPRAY GUN.
ALWAYS clean the spray gun outside in a safe area.
ENSURE the area is free from any flammable vapours and the areas well ventilated.

INSTRUCTIONS FOR CLEANING

1. Turn off and unplug the
spray gun, and press the
trigger so any painting
material inside the spray
gun flows back into the
container.
2. Unscrew the container.
Empty any remaining
paint back into its
original container.
NOTE - DO NOT return
any paint that has been
diluted/thinned back into
its original container -
dispose of in the correct
manner or store in a
separate sealed container.
1
2
1. Light Coat
2. Heavy Coat
3. Light Coat
3. For a small amount of
4. Refill the container with
5. Re-attach the container
3
appropriate cleaning
solution into the Paint
Sprayer container.
Clean the container
and dispose of the
cleaning solution in an
appropriate manner.
a small amount of NEW
cleaning solution.
to the gun, plug in the
Sprayer and turn on.
M
M
T

Publicidad

Tabla de contenido
loading

Tabla de contenido