Specifications - RIDGID K-5208 Manual Del Usario

to clean 2" (50mm) to 8" (200mm) drain lines and up to
200 feet (61m) in length depending on size of cable.
Applications include laterals, main lines, commercial
lines.
A FOR/O-OFF/REV switch controls cable rotation and pro-
vides ON/O-OFF control of the motor. An integral Ground
Fault Circuit Interrupter (GFCI) is built into the line cord.
The K-5208 is designed to use
(32mm) diameter sectional-type cable, having a quick-
change coupling system for connecting and disconnect-
ing cables and tools. The cable is manually fed in and out
of the drain and rotates at a speed of 700 RPM.
The rotation of the cable is controlled by a clutch lever
handle. The cable stops instantly when the clutch lever
handle is released.
A cable decoupler is provided for disconnecting the cables
and tools.
Clutch Lever Handle
Lock Pin
Warning Label
Cable Outlet
(Front of Machine)
FOR Direction
Marking
GFCI
Clutch Cover
Clutch Adjustment
Lever
Rear Guide
Hose Pins
(Rear
of Machine)
Cord Clips
Figure 1 – K-5208 Drain Cleaning Machine
999-995-137.10_REV. B
7 / " (22mm) and 1¼"
8
Clutch Cover
Belt
Tensioner
Frame
Drain
Plug
Motor Cover
O
FOR OFF REV
Switch
Serial Plate
Decoupler
Decoupler
Holder
K-5208 Drain Cleaning Machine
Ridge Tool Company, Elyria, Ohio,
U.S.A.
Model No.
K-5208
Serial No.
VCF123450618
120 V
10.4 A
n
700 /min Duty
o
Figure 2 – Machine Serial Number - The last 4 digits in-
dicate the month and year of the manufac-
ture. (06 = month, 18 = year).

Specifications

Drain Line Capacity..........2-8" (50 to 200 mm) See Chart
Cable ............................. 7 /
Cable Size Drain Size
7 / " (22 mm) 2" to 4"
8
(50 to 100 mm)
C-10 2" to 4"
(50 to 100 mm) Drains
C-10 IC 2" to 4"
(50 to 100 mm) Drains
1¼" (32 mm) 3" to 8"
(75 to 200 mm)
C-11 3" to 8" (75 to 200 mm)
Drains, 4" (100 mm) Traps
C-11 PC 4" (100 mm) Traps
C-12 4" to 8" (100 to 200 mm) Drains,
Not for 4" (100 mm) traps
C-14 3" to 8" (75 to 200 mm) Drains,
Not for 4" (100 mm) traps
C-15 3" to 6" (75 to 150 mm),
Good for traps
All Cables come in 15' (4.5 m) lengths
Motor Type ....................Induction, 3/4 HP Nominal
Output
Motor Ratings
Volts (V) 120
Frequancy (Hz) 60
Current Draw (A) 10.4
Power (W) 1248
No Load Speed ( o) 700
Refer to on product serial plate for information specific to
unit.
Controls .........................FOR/O-OFF/REV Switch
Clutch lever handle
Operating
Temperature..................-20° F to 120° F (-29° C to 49° C)
RIDGID.com
60
Hz
W
5011050
" and 1¼" Cable
8
Reach
Up to 175' (53 m)
Up to 200' (61 m)
All Purpose,
3 / " (10 mm) pitch
8
C-11 w/Plastic Core
Extra Heavy Duty,
3 / " (10 mm) pitch
8
Heavy Duty,
½" (13 mm) Pitch
Extra Flexible,
½" (13 mm) Pitch
220-240 110
50/60 50
5.2 10.4
1248 1144
585/700 585
5