Sx Type Welding Machine; Features; Operating; Installing The Torch On The Sliding Head - AXXAIR SX122-A Instrucciones Originales

INNOVATIVE ORBITAL SOLUTIONS

5. SX type welding machine

5.1. Features:

Maximum welding
current for an
100A
operating factor of
100%:
Outside
diameter of the
tube:
Diameters of
the electrode:
Cooling unit:

Operating

temperature:

5.2. Installing the torch on the sliding head

Before installing the welding torch on the sliding head, the electrode, the ceramic cup, and the
gas diffuser on the torch must be removed. To do this, see the SATDA-06/SATDE-06 manual.
Sliding head
SARGL-10
Adjustment nut
SAGRL-16
Welding torch

Remove the SAGRL-15 bushing by unscrewing the four M03x12 fixing screws.

Place the two SAGRL-14 C-rings in the slot in the middle.

Slide the torch into the head.

Fix the bushing on the SAGRL-16 adjustment nut with the four M03x12 screws.

Remove the electrode (ref. SCE-1-16-50 or SCE-1-24-50), the ceramic cup (ref.SCBC-06 or
SCBC-08 or SCBC-09 or SCBC-11 or SCBC-12), and the gas diffuser (ref. SCDA-16 or SCDA-
24) from the torch.
Join experience
0
SX122 SX172
-A -E -A
200A 100A
12 à 120 mm 16 à 170 mm
No Yes No
Ambient temperature must be between 0°C and +40°C
SAS au capital de 135 720 € - RCS Romans B414 581 363 – Code APE 2841 Z – Siret 414 581 363 00028 – TVA FR13414 581 363
SX222
-E -A -E
200A 100A 200A
59 à 225 mm
1.6 m ou 2.4 mm
Yes No Yes
C-rings
SAGRL-14 x 2
Bushing
SAGRL-15
Fixing screw
M03x12 x 4
330B Route de Portes Les Valence - ZI Les Bosses - 26800 Etoile sur Rhône
Tél: +33 475 575 070 - Fax: +33 475 575 080 - commerce@axxair.com - www.axxair.com
- 19 -
English
SX322
-A -E
100A 200A
140 à 330 mm
No Yes