Stage 2 Seat Assembly - Evenflo ExerSaucer Triple Fun Manual De Instrucciones

Stage 2 Tray Assembly
E
K
I
A
A
N
P N
O
I
7. Secure the leg lock I with screw E and washer
Do not overtighten.
Note: Check that each leg lock is installed correctly by
pulling backward, then releasing it. If the leg lock springs
back into positon, it is installed correctly. If it does not spring
back into position, remove the screw and washer and repeat
Steps 5 and 6. Repeat for all legs.
8. Assemble the tray by snapping both tray
A
halves together, as shown.
Note: Make sure the tray halves lock
securely.
N
9. Locate the large end cap
O
mounting posts for storage, as shown.
P
Locate the small end cap
Q
mounting posts for storage, as shown.
P
Q
6
A
K .
A
and press it onto
and press it onto
C
1. Place seat ring
B
holders
holders, as shown.
B
B
2. Turn seat ring
the back of the seat ring with the triangle
seat pad label. Snap the plastic tabs
over the pegs
E
process until all tabs are attached to all pegs.
F
D
G
3. Press assembled seat ring
until it snaps into place and spins freely.
H
I
7

Stage 2 Seat Assembly

A upside down and locate the wheel
C
. Snap six (6) seat wheels into wheel
A right side up. Align triangle D on
E
on the
F on the pad
G
on the seat ring. Continue this
H I
down firmly onto the top of the tray