Operating Instructions; Important Safety Notes - WELDY roofer RW3400 Manual De Instrucciones

Operating Instructions

Congratulations on purchasing your roofer RW3400!
You have chosen a first-class automatic hot-air welding machine which has been designed and manufactured in
accordance with the very latest knowledge available in the plastics-processing industry. High-quality materials
have been used in its manufacture.

1. Important Safety Notes

You must read these Operating Instructions prior to commissioning the machine. These Operating Inst-
ructions must be kept with the device at all times. If you pass the device on to another person, you must
include the Operating Instructions.
In addition to the safety information in the individual chapters of these Operating Instructions, the following require-
ments must be strictly complied with at all times.
Warning
Caution
FI
(Translation of the original operating instructions)
Danger to life! Before opening the device, disconnect the power plug from the
outlet, because live components and connections are being exposed.
Danger of fi re and explosion caused by improper use of the automatic welding
machine (e.g., material overheating), and particularly in the vicinity of fl ammable
materials and explosive gases.
Risk of burning! Do not touch heating element tube and nozzle when they are
hot. Always allow the device to cool down fi rst.
Do not point the hot air fl ow at people or animals.
Connect the device to an outlet with a protective conductor. Any interruption of
the protective conductor inside or outside the device is dangerous!
Only use extension cables with protective conductors.
The nominal voltage indicated on the device must match the nominal voltage
on site. If the line voltage fails, the hot air blower and the drive must be switched
off , move out the hot air blower.
EN 61000-3-11; Zmax = 0.023 Ω + j 0.014 Ω. If necessary, consultate supply
authority.
A circuit breaker is urgently required for personnel protection when the device is
used on construction sites.
The device must be monitored at all times during operation. Waste heat can
reach fl ammable materials that are not in view. The device may be used only
by trained specialists or under their supervision. Children are not permitted to
operate the equipment under any circumstances.
Protect the device against humidity and dampness.
The device is equipped with a laser guide – class II laser (P<5mW).
Do not look directly into the laser. Do not point the laser at another person.
Two persons are required for transporting the machine with the transport box.
GB
15