Frequently Asked Questions, Causes And Measures; Accessories; Service And Repair; Warranty - WELDY roofer RW3400 Manual De Instrucciones

8. Frequently asked questions, causes and measures

Poor quality welding result:
• Check the drive speed, the welding temperature, and the air volume.
• Clean the welding nozzle (3) with a wire brush.
• Welding nozzle (3) set incorrectly (see Setting the welding nozzle).
The required welding nozzle has still not been reached after a maximum of 5 minutes:
• Check the line voltage.
• Reduce the air volume.

9. Accessories

Only genuine Weldy spare parts and accessories may be used. Failure to use such spare parts and accessories will
invalidate the warranty and guarantee.
For more information, go to www.weldy.com

10. Service and repair

Repairs may only be carried out by local Weldy partners. Usage is limited to the use of original accessories and original
spare parts from Weldy.
For more information, go to www.weldy.com.

11. Warranty

• The guarantee or warranty rights that were agreed upon by the local Weldy partners apply for this device.
• In the case of guarantee or warranty claims, all manufacturing or processing errors shall be repaired or replaced
by the local Weldy partners at their own discretion.
• Other guarantee or warranty claims are excluded within the framework of mandatory law.
• Damages resulting from natural wear, overload, or improper handling are excluded from the warranty.
• Heating elements shall be excluded from warranty obligations or guarantees.
• No guarantee or warranty claims exist for devices which have been converted or changed by the purchaser or for
which non-original Weldy spare parts have been used.

12. Declaration of conformity

Leister Technologies AG, Galileo-Strasse 10, CH-6056 Kaegiswil, Switzerland confirms that this product ful-
fils the requirements of the following EU Guidelines in the models that we have made available for purchase.
Guidelines:
Harmonized standards:
Name of the authorized document official: Volker Pohl, Manager Product Conformity
Kaegiswil, 02/01/2017

13. Disposal

Never dispose of electrical equipment with household refuse!
Electrical equipment, accessories, and packaging should be subjected to environmentally
friendly recycling.
24
2006/42, 2014/30, 2014/35, 2011/65
EN 12100, EN 55014-1, EN 55014-2, EN 61000-6-2, EN 61000-3-2,
EN 61000-3-3, EN 61000-3-11 (Z
EN 50581
Bruno von Wyl, CTO
), EN 62233, EN 60335-1, EN 60335-2-45,
max
Andreas Kathriner, GM