Power Source - Insignia NS-UPDVD Guia Del Usuario

Insignia NS-UPDVD 1080p Upconvert DVD Player
• Do not remove any labels or stickers on the
back panel of your player.
• Place your player in the location you want.
Your player is designed to be used on a level,
stable, flat surface, such as a table, desk,
shelf, or stand convenient to a power outlet,
out of direct sunlight, and away from sources
of excess heat, dust, moisture, or vibration.
• Unwind the AC power cord and extend the
cord to its full length, then plug it into the back
of your player.

Power source

Use the polarized AC line cord provided for
operation on AC power. Insert the AC cord plug
into a standard 120 V 60 Hz polarized AC outlet.
Video connection
Caution
Do not plug in the AC power plug until you have
finished making the system connections.
To connect to your TV with a video cable:
• Connect one of the VIDEO OUT jacks
(HDMI, component, S-Video, or composite)
on your player to the corresponding VIDEO
IN jack on the TV (see illustration).
CVBS
HDMI OUT
VIDEO OUT OPTICAL OUT PUT
HDMI cable
S-Video cable
Audio cable L/R
Coaxial digital
audio cable
Amplifier/Receiver
Optical audio
cable
www.insignia-products.com
If you cause a static discharge when touching
your player and your player fails to function,
unplug your player from the AC outlet and plug it
back in. Your player should return to normal
operation.
Warnings
Component video cables
Composite (CVBS) video cable (yellow)
Back of player
Note: Connect only ONE of
the video cables to your TV
to avoid picture
interference.
Audio connection
To connect to your TV with audio source:
• Connect the left and right AUDIO OUT jacks
on the back of your player to the audio left
and right in jacks on the TV using the
supplied audio cables.
To connect a two-channel digital stereo or
A/V receiver with multi-channel decoder:
1 Connect one of your player's DIGITAL
AUDIO OUT jacks (coaxial or optical) to the
corresponding in jack on your amplifier. Use
an optional digital (coaxial) audio cable or
digital optical cable.
• The system uses a polarized AC plug with one
wide blade and one narrow blade. The plug will
only fit into matching polarized power outlets.
This is a safety feature to reduce the possibility
of electric shock. If the plug will not fit in your
power outlets, you probably have outdated,
non-polarized outlets which should be changed
by a qualified, licensed electrician. Do not file
the wide blade on the plug or use an adapter to
make the plug fit into your outlet.
• Never connect the AC cord plug to other than
the specified voltage (120 V 60 Hz). Use the
attached power cord only.
L R
C
Speakers
S W
S L
S R
9