Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
GB
Mounting the articulated arm (Figures 5, 6, 7)
1.
The arm must be put in straight by the keyed shaft; position the 11 x30
washer and lock the arm with the M10x28 screw.
2.
Release the geared motor by turning the key clockwise, opening the
door 90° and pulling the release knob.
3.
Fit the bushing on the other end and lock the curved arm to the gate
bracket with the M12x40 screw and M12 nut.
Drawing 4
37
Publicidad
Tabla de contenido
