Peco T190 El Manual Del Propietario página 23

and temperature digits will start flashing.)
4. Press PROG twice to keep the HEAT and COOL setpoints unchanged. Now, the
"UNOCC1" event icon and temperature digits will start flashing.
5. Press D/T so the display shows "--:--", indicating the UNOCC1 program is off. Press
PROG once. (The "OCC2" event icon and temperature digits will start flashing.)
6. Press D/T so the display shows "--:--", indicating the OCC2 program is off. Press
PROG once. (The "UNOCC2" event icon and temperature digits will start flashing.)
7. Press PROG three times to keep the UNOCC2 start time, HEAT setpoint, and COOL
setpoint unchanged. Press
new program is complete.
Now copy Saturday's program to Sunday:
1. Press PROG once. One day icon and all four event icons will start flashing.
2. Press ▲ or ▼ to scroll to "SA", then press USAGE once. "SA" and all 4 event icons
will stay lit, and "SU" starts flashing. The display will read "COPY t0".
3. Press USAGE once to initiate copying. The display will read "COPY" while copying.
When copying is complete, press
program is complete.
once to exit and return to Normal Mode. Saturday's
once to exit and return to Normal Mode. Sunday's
2