Unpacking And Setup; Package Contents - Atlantis NetMaster SGE Serie Guia De Inicio Rapido

 Supports PCI Express™ 1.0a (A02-SGE)
 Plug-and-Play installation
 One RJ-45 connector: Auto detection of 10Mbps Ethernet, 100Mbps Fast
Ethernet and 1000Mbps Gigabit Ethernet & Auto MDI-X
 Supports 10/100/1000Mbps Auto-negotiation operation
 Full Duplex support for 10/100/1000Mb/s data rates
 Auto MDI-II/MDI-X crossover for all three speeds
 Built-in 8 KB Transmit and 64 KB (16K for A02-SGE) Receive data FIFOs
 Supports IEEE802.1Q VLAN tagging

2 LED indicators for easy diagnostic

3. Unpacking and Setup

This chapter provides unpacking and setup information for the Switch.

3.1 Package Contents

Unpack the package and check all the items carefully. If any item contained is
damaged or missing, please contact your local dealer as soon as possible. Also, keep
the box and packing materials in case you need to ship the unit in the future. The
package should contain the following items:
 1 x NetMaster SG32/SGE
 1 x Low Profile Bracket
 1 x Cd-Rom contains manual and driver
 1 x Quick Start Guide
 1 x Warranty Card (Italian)
If any item is found missing or damaged, please contact your local reseller for
replacement.
Under ordinary circumstances, the device will not be
affected by static charge as may be received through
your body during handling of the unit. However, there
are special circumstances where you may carry an
extraordinarily high static charge, and possibly
damage the card and/or your computer. It is good
practice to eliminate all static electricity by touching a
ground (an unpainted metal area of your computer
chassis, for example)
installations.
20
before performing any