Assembly/Disassembly - Robot Coupe MP 350 Turbo Manual De Instrucciones

Handle conveniently located
on the mixing tool for a bet-
ter grip.
ASSEMBLY / DISASSEMBLY
• BLADE FUNCTION
Attaching the tube to the motor unit,
( Except for MP 350 Turbo, MP 450 Turbo,
MP 550 Turbo, MP 600 Turbo).
- Unplug the power mixer.
- Unplug the machine then, align the flat side of
the conical part of the tube with catch
C
aluminum casing.
- Insert the narrow portion of conical part
tube into the aluminum casing.
- Turn the tube in the direction of the arrow (see
figure) until it is snugly in place.
8
Removing the tube from the casing
- Unplug the power mixer.
- Turn the tube in the opposite direction of that used
to attach it.
- When it will not go any further, remove the tube
from the conical part.
Attaching the bell to the tube
TURN TO
ATTACH BELL
- Unplug the power mixer.
- Align the flat side of
tube with catch
B
- Insert the conical part
washer touching the tube seal
the direction of the arrow (See figure) to lock the
bell lug and tube lug
E
Disassembling the bell from the tube
TURN TO REMOVE BELL
A
in the
B
of the
C
A
the conical part of the
on the inside of the bell.
into the bell. With the
C
, turn the bell in
D
snugly together.
F
- Unplug the power mixer.
- Turn the bell in the direction of the arrow
next figure) to separate the bell lug
tube lug .
F
- Remove the bell.
Removing the blades
Unplug the machine. Turn the bell in the direction of
the arrow (see next figure) to separate the bell
1
from the foot lug . Remove the bell.
E
F
To safely remove the sharp blades, hold with the
provided blade locking tool. Using the blade di-
sassembling tool, unscrew the male drive coupling.
As the drive coupling is unscrewed disengage the
blade for easy cleaning.
BLADE LOCKING
BLADES WITH WATERTIGHT SEALS
BELL
MALE DRIVING COUPLING
BLADE REMOVAL
(see
1
from the
E