For Pc-Compatible Users (Windows 98/98Se/Me/2000); Before Installation; Installing P-Touch Quick Editor - Brother P-Touch 1500PC Serie Referencia Rápida

For PC-compatible users (Windows
Before labels can be printed on the PT-1500PC, label-designing software and the PT-1500PC printer
driver must be installed. In order to design labels that can be printed on the PT-1500PC, two applications
are available on the enclosed CD-ROM: P-touch Quick Editor and P-touch Editor Ver. 3.1

Before installation

Check that your system configuration meets the following requirements.
Computer: IBM PC or compatible
Operating system: Microsoft
Hard disk free space: At least 20 MB
Available memory: Minimum 32 MB
Monitor: VGA or higher graphics card
USB port
CD-ROM drive
Do not connect the PT-1500PC to the computer before installing the label-designing software,
otherwise it may not be installed correctly. Be sure not to connect the PT-1500PC until you are
instructed to do so.
For installation on Windows
In addition, printing requires power user or administrator privileges.
This software cannot be operated in Users groups.

Installing P-touch Quick Editor

The P-touch Quick Editor software provides quick access to the more simple label-designing features for easy
text input and instant printing of labels. Install the P-touch Quick Editor software on a PC as described below.
1 Insert the enclosed CD-ROM into the
computer's CD-ROM drive. A dialog box
appears, allowing you to select what to install.
T o install just the printer driver, click the bottom
button (Driver) on the right side. The first Driver
Setup dialog box appears, informing you that the
PT-1500PC printer driver will be installed.
Continue with the procedure in Installing
the printer driver on page 9.
6
® Windows ® 2000 or pre-installed with Microsoft
® 2000, administrator privileges are required.
®
98/98SE/Me/2000)
® Windows
To install the P-touch Editor Ver. 3.1 software,
click the top button (P-touch Editor) on the
right side. Then, continue with the procedure
in Installing P-touch Editor Ver. 3.1 on page 8.
If the dialog box does not automatically
appear, double-click "My Computer" on the
desktop, double-click the icon for the CD-
ROM drive containing the CD-ROM, and
then double-click "Setup.exe" to display the
dialog box.
2 Click the left button (P-touch Quick Editor). The
®
InstallShield Wizard for installing the P-touch
Quick Editor software starts up, and then the
Welcome dialog box appears.
® 98/98SE/Me