American Dynamics Illustra 625 Guía De Referencia Rápida página 18

English Illustra 625 PTZ Outdoor Housing
e Loosely tighten the six M4 screws using the tamperproof torx wrench in the sequence
shown in Figure 11.
f Repeat the process and securely tighten each screw using the tamperproof torx
wrench in the sequence shown in Figure 11.
Note
Do not overtighten the screws as they may damage the trim ring assembly.
12 Attach the clip on the safety lanyard in the pendant adaptor to the L hook on base of the
outdoor camera housing as seen in Figure 12.
Ensure that the clip is securely attached.
8
Figure 10
Figure 11
Quick Reference Guide