Declaration Of Conformity; Delivery Scope; Intended Use; Technical Data - SPIT 383 SVC Manual Original

OBJ_BUCH-2829-001.book Page 11 Wednesday, April 6, 2016 3:07 PM
Symbol Meaning
Brickwork
Twist drill bit
Break-through drill bit
Core bit
Weight according to
EPTA-Procedure 01:2014
Protection class
L Sound power level
wA
L Sound pressure level
pA
a Vibration total value
h
K Uncertainty

Delivery Scope

Rotary hammer, auxiliary handle.
Application tools and other accessories shown or de-
scribed are not part of the standard delivery scope.
A complete overview of accessories can be found in
our accessories program.

Intended Use

The machine is intended for hammer drilling in con-
crete, brick and stone as well as for chiselling.

Technical Data

The technical data of the machine are listed in the ta-
ble on page 83.
The values given are valid for a nominal voltage [U] of
230 V. For different voltages and models for specific
countries, these values can vary.
1 609 92A 2KR • 6.4.16

Declaration of Conformity

We declare under our sole responsibility that the prod-
uct described under "Technical Data" is in conformity
with all relevant provisions of the directives
2011/65/EU, until 19 April 2016: 2004/108/EC, from
20 April 2016 on: 2014/30/EU, 2006/42/EC including
their amendments and complies with the following
standards: EN 60745-1, EN 60745-2-6.
Technical file (2006/42/EC) at:
SPIT SAS, 150 Route de Lyon BP104,
2501 Bourg-Lès-Valence Cedex, FRANCE
Jean-Michel DREVETON
SPIT Quality Manager
Operations Valence
SPIT SAS; 150, Route de Lyon;
26500 Bourg-lès-Valence Cedex
FRANCE
08.04.2016

Noise/Vibration Information

The measured values of the machine are listed in the
table on page 83.
Sound emission values determined according to
EN 60745-2-6.
Vibration total values a (triax vector sum) and uncer-
h
tainty K determined according to EN 60745-2-6.
The vibration level given in this information sheet has
been measured in accordance with a standardised
test given in EN 60745 and may be used to compare
one tool with another. It may be used for a preliminary
assessment of exposure.
The declared vibration emission level represents the
main applications of the tool. However if the tool is
used for different applications, with different accesso-
ries or insertion tools or is poorly maintained, the vi-
bration emission may differ. This may significantly in-
crease the exposure level over the total working
period.
An estimation of the level of exposure to vibration
should also take into account the times when the tool
is switched off or when it is running but not actually
doing the job. This may significantly reduce the expo-
sure level over the total working period.
Identify additional safety measures to protect the op-
erator from the effects of vibration such as: maintain
the tool and the accessories, keep the hands warm,
organisation of work patterns.
English | 11