Installer System Test - Honeywell VisionPRO TH8000 Serie Guia De Instalacion

Installation Guide
TUE

Installer system test

70
Inside
During installer setup, press
repeatedly until "Test" appears.
0120
DONE
Shaded areas below apply only to TH8320/TH8321.
System test
1 Cooling system
2 Fan system
3 Heating system
4 Emergency
heating system
CAUTION: EQUIPMENT DAMAGE HAZARD. Compressor protection is bypassed
during testing. To prevent equipment damage, avoid cycling the compressor quickly.
t
20
System status
0 Compressor and fan turn off
1 Compressor and fan turn on
2 Second stage compressor turns on
0 Fan turns off
1 Fan turns on
0 Heat and fan turn off
1 Heat turns on (fan on if Function 0170 is set for heat pump,
or if Function 0180 is set to "1")
2 Second stage heat turns on
3 Third stage heat turns on
0 Heat and fan turn off
1 Heat and fan turn on
2 Second stage heat turns on (Auxiliary heat)]
Test
number
DONE
Press
select test
Press DONE to terminate testing.
10
System
status
1
TEST
to Press
st
change status
** See page 6
0
to
st