Important Safety Information; Before First Use - Breville BLEND-ACTIVE PRO VBL212X Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 12

IMPORTANT SAFETY INFORMATION

PLEASE READ THESE INSTRUCTIONS BEFORE OPERATING
THE APPLIANCE AND RETAIN THEM FOR FUTURE USE.
This appliance can be used by persons
with reduced physical, sensory or mental
capabilities or lack of experience and
knowledge if they have been given
supervision or instruction concerning use of
the appliance in a safe way and understand
the hazards involved. This appliance shall not
be used by children. Children shall not play
with the appliance. Keep the appliance and
its cord out of reach of children.
Always disconnect the appliance from the
mains supply socket if it is left unattended
and before assembling, disassembling or
cleaning.
If the supply cord is damaged, it must be
replaced by the manufacturer, its service
agent or similarly qualified persons in order
to avoid a hazard.
The blades have very sharp edges. Take
care when handling or cleaning them.
This appliance can be used for a maximum
of 30 seconds, followed by a rest of 60
seconds.
• Always allow the appliance to come to a stop and unplug
before changing or cleaning accessories.
• Never use this appliance for anything other than its intended
use. This appliance is for household use only. Do not use this
appliance outdoors.
• Always ensure that hands are dry before handling the plug or
switching on the appliance.
• Always use the appliance on a stable, secure, dry and level
surface.
• This appliance must not be placed on or near any potentially
hot surfaces (such as a gas or electric hob).
• Do not use the appliance if it has been dropped, if there are
any visible signs of damage or if it is leaking.
• Never immerse the motor base or power cord and plug in
water or any other liquid.
• Never let the power cord hang over the edge of a worktop,
touch hot surfaces or become knotted, trapped or pinched.
• Never leave the appliance unattended when in use.
• Never use any accessory or attachment not recommended
by the manufacturer.
5
VBL212X_17MLM1 P.indd 5
EN
• Never process hot or boiling liquids. Allow them to cool
before processing.
• Never attempt to fit the blade assembly onto the motor unit
by itself.
PARTS
2 x Sports-style resealable lid
q
Blade assembly
w
Grinding mill
e
Motor unit
r
2 x 600ml bottle
t
Food processor bowl
y
Food processor blade
7
8
Food processor blade housing
7
8

BEFORE FIRST USE

Remove your Breville
Blend Active
®
1
packaging. Store the packaging for future use.
1
Wash all parts that will come into contact with food (follow the
instructions under Cleaning).
2
HOW TO USE
2
Ensure that the appliance is switched off and unplugged from
the supply socket if it is left unattended and before assembling,
disassembling or cleaning. Never attempt to fit the blade assembly
onto the motor unit by itself.
3
1. Add the ingredients to the bottle. Don't fill the bottle above the
3
600ml mark.
2. Fit the blade assembly onto the bottle. Tighten firmly
3. Turn the bottle upside down so that the blade assembly is at the
B
bottom then line up the
B
the
symbol on the rim of the motor unit
A
4. Gently press the bottle downwards then twist it clockwise until
A
the
symbol on the blade assembly is aligned with the
symbol on the rim of the motor unit. Your blender will not work
unless the bottle is correctly locked into position
600ml
MAX
5. Press and hold the blend button to operate your blender. You
600ml
MAX
can either press and hold the button or use short pulses until
your drink is at the desired consistency.
This appliance can be used for a maximum of 30 seconds,
followed by a rest of 60 seconds.
6. When you have finished blending your drink, twist the bottle
anticlockwise until the
and remove the bottle and blade assembly. Turn the bottle the
right side up then unscrew the blade assembly and fit one of
the resealable lids onto the bottle
resealable lid firmly until it "clicks".
When crushing ice, always add a small amount of liquid to the ice
before processing to prevent possible damage to the blades.
blender carefully from the
4
5
4
.
A
symbol on the blade assembly with
C
.
B
C
.
C
symbol is aligned with the
symbol
. Close the cap of the
D
4/20/18 11:27
Us
see
DO
(G
Ad
Sc
att
in s
H
Th
Bre
ed
1.
2.
6
5
3.
4.
5.
6.
D
7.
D
8.
9.
10
Co
F
p
o
m

Publicidad

Tabla de contenido
loading

Tabla de contenido