Publicidad
Idiomas disponibles
Idiomas disponibles
Table of contents
Specifications
on page 3
General information
on page 4
Installation
on page 8
Specifications
Specifications are subject to change without notice.
Specification
Details
Dimensions (W x D x
13.56 x 8.93 x 12.06 cm (5.34 x 3.52 x 4.75 in.)
H)
Enclosure
304 stainless steel
Light source
Long Life Laser
Weight
0.82 kg (1.8 lb)
Pollution degree
2
Installation category
I
Protection class
III
Power requirements
9–28 VDC (source: Class 2 limited energy, < 150 VA)
Power consumption
Serial and pulse units: 3.3 W; Ethernet unit: 4.3 W;
(maximum)
Analog: 3.5 W; 1 A maximum
Operating
5 to 40 °C (40 to 104 °F); best performance: 10 to 32 °C
temperature
(50 to 90 °F)
Storage temperature
–40 to 70 °C (–40 to 158 °F)
Humidity
Operating and storage: 5 to 95% relative humidity, non-
condensing
Altitude
2000 m (6562 ft) maximum
Startup
on page 15
Operation
on page 16
Maintenance
on page 23
™
diode , Class 3B laser
Specification
Details
Port sizes
Model 6003, 6005: barb fitting for 0.32 cm (1/8-in.) ID
inlet tubing, 0.64 cm (¼-in.) ID outlet tubing
Model 6013, 6015: barb fitting for 0.64 cm (¼-in.) ID inlet
tubing, 0.64 cm (¼-in.) ID outlet tubing
Output signal options
Pulse, analog 4–20 mA, serial RS232 with Modbus RTU
or FXB communication protocol (no networking), serial
RS485 with Modbus RTU or FXB communication
protocol, Ethernet with ModbusTCP protocol
Data storage
1000 samples/records (oldest records are written over
when the buffer is full)
Sample flow rate
Model 6003, 6005: 0.1 cfm (2.83 Lpm) ± 5%
Model 6013, 6015: 1.0 cfm (28.3 Lpm) ± 5%
Inlet pressure
Ambient to 2.5 mm (0.1 in) Hg vacuum
Vacuum requirement
≥ 406 mm (16 in.) Hg (542 mbar) minimum vacuum
measured at each instrument with flow through all
instruments.
Range
Model 6003: 0.3 μm to 10.0 μm at 0.1 cfm (2.83 L/min)
Model 6005: 0.5 μm to 10.0 μm at 0.1 cfm (2.83 L/min)
Model 6013, 6015: 0.5 μm to 10.0 μm at 1.0 cfm
(28.3 L/min)
Sensitivity
Model 6003: 0.3 μm at 0.1 cfm (2.83 L/min)
Model 6005: 0.5 μm at 0.1 cfm (2.83 L/min)
Model 6013: 0.3 μm at 1.0 cfm (28.3 L/min)
Model 6015: 0.5 μm at 1.0 cfm (28.3 L/min)
Counting efficiency
Model 6003: 50% (± 20%) for 0.3 μm, (100% ± 10% at
1.5 times the minimum sensitivity)
Model 6005, 6013, 6015: 50% (± 20%) for 0.5 μm, (100%
± 10% at 1.5 times the minimum sensitivity)
Coincidence loss
Model 6003, 6005 (all output options): 10% at
140,000,000 particles /m
Model 6013, 6015 (all output options except for pulse):
10% at 20,000,000 particles/m
1
.
1
.
3
3
(4,000,000 particles /ft
)
3
3
(566,000/ft
)
English 3
Publicidad
