Cosentino Bathroom Serie Manual De Instrucciones página 8

5. Other work
(optional)
5.1. Check that the shower tray is installed correctly
and that it drains properly.
Assembly methods
for shower trays:
a) Flush:
Warnings:
Before installation:
• Do not install the shower tray outside or in places
exposed to direct UV radiation.
• It is important to leave enough space to deepen and
place the drain valve.
During installation:
• Protect edges while handling trays using cardboard
or plastic.
• Protect the shower tray with cardboard or plastic
and secure with masking tape to prevent damages.
This manual shows the general instructions to install shower trays.
8
5.2. Ensure that the installation of the tray is
complete before placing new tiles, installing
screens, or making any other changes. If walls
are covered with Silestone® surfaces, it is
recommended to install the tray first and the
Silestone® surfaces later.
b) Over the floor:
After installation:
• Seal the joint between the tray and the rest of the
floor completely to prevent leaks.
• Clean adhesive residue and dirt using isopropyl
alcohol or clean-colorsil.
• For regular cleaning of these surfaces, Cosentino
recommends the use of Q-Action or neutral soap.
For stubborn stains, use a blue (non-scratching)
sponge, without rubbing the affected area too hard.
Even though Silestone® trays feature a protective
treatment that helps prevent dirt buildup, these
areas require more maintenance.
c) Raised + skirt