This manual has been prepared by the manufacturer
and is an integral part of the product. As such, it
must be kept in a safe place for the machines entire
service life until demolition. This machine is a floor
scrubber-drier: it must be used to scrub and to
vacuum liquids of flat, rigid, horizontal, smooth or
moderately rough and uniform floors that are free
from obstacles in both civic and industrial
environments. Any other use is prohibited. Please
refer very carefully to the safety information reported
in this manual.
For the sake of clarity and to efficiently highlight the
various aspects of the instructions provided, terms
and symbols were used that are defined and
illustrated here below:
- Machine. This definition replaces the commercial
name to which this manual refers.
- Operator. An operator is considered the person
who normally uses the machine and is familiar with
its operating features but does not have the specific
technical skills to work on that machine.
- Technician. A technician is considered a person
who has the experience, technical education,
legislative and regulatory knowledge that allows him
to carry out any type of required work, and the ability
to recognize and to avoid possible risks during
machine installation, operation, handling and
maintenance.
It is important to carefully read the contents of this
manual before using the machine and it is especially
important for those who use the machine, operators,
and supervisors, to be well-acquainted with the
cannot be held responsible for any mishap,
breakdown, accident or any other event resulting
from the ignorance, incorrect application or lack of
application, of the instructions given in this manual.
Likewise, the manufacturer will not accept any
responsibility for breakdown, accident or damage
caused by changes or variations made to the
machine by the users without previously obtaining
the written authorisation from the manufacturer.
12
for its use. The manufacturer
Moreover, the guarantee covering the appliance will
no longer be valid if such unauthorised changes are
made.
The manufacturer reserves the right to make
modifications to the machine, for any construction
or commercial requirement, without being obliged
to update the instruction manual in time.