Setup Menu Setting; General Setup Page - Ferguson DVD-180 Manual De Usuario

SETUP Menu Setting

General Setup Page

Press SETUP button to get the setup menu. Use direction buttons
to select the preferred item. After finishing settings, press
SETUP again to normal display.
The following menu items can be changed:
GENERA L : selects the GENERAL PAGE menu
A UDIO: selects the AUDIO PAGE menu
VIDEO: selects the VIDEO PAGE menu
PREFERENCE : selects the PREFERENCE PAGE menu
PA SSWORD: selects the PASSWORD PAGE menu
Gen er al S et u p P ag e
- - GENERALSETUP PAGE - -
TV DISPLAY WIDE
ANGLE MARK ON
OSD LANGUAGE ENG
CLOSED CAPTIONS ON
SCREEN SAVER ON ON
OFF
AUTO STANDBY 3H
3 HOURS
4 HOURS
OFF
GOTO GENERAL SETUP PAGE
4:3 PANSCAN
ON 4:3 LETTERBOX
16:9
ENGLISH OFF
FRENCH
ON
GERMAN
OFF
ITALIAN
SPANISH
POLISH
PORTUGUESE
12
TV DISPL AY: selects the aspect ratio of the playback picture.
4: 3 PA NSCA N: if you have a normal TV and want both sides of the
picture to be trimmed or formatted to fit your TV screen.
4: 3 L ETTERB OX: if you have a normal TV. In this case, a wide
picture with black bands on the upper and lower portions of the TV
screen will be displayed.
16: 9: wide screen display.
Angle Mark
Displays current angle setting information on the right hand corner
of the TFT screen if available on the disc.
OSD Language
You can select your own preferred language seetings.
Closed Captions
Closed captions are data that are hidden in the video signal of some
discs.Before you select this function,please ensure that the disc
contains closed captions information and your TV set also has this
function.
Screen Saver
This function is used to turn the screen saver On or Off.
Auto Standby
This function is used to select auto standby settings after 3 or 4 hours.
3 HOURS: the unit will turn to standby mode after 3 hours if there is
no interaction from user within this period of time.
4 HOURS: the unit will turn to standby mode after 4 hours if there is no
interaction from user within this period of time.
OFF: the auto standby function is disabled, and unit will stay in "on"
mode even if no interaction from user.
13