Publicidad
Idiomas disponibles
Idiomas disponibles
Features
IEC-60320-C13
IEC-60320-C19
B
3
A
1
2
E
3
C
17-10-167-933732.indb 5
IEC 309 Blue 32A (2P+E) Input Plug
Outlets: During normal operation, the outlets distribute AC
power to connected equipment. When an outlet is live, the
associated LED illuminates.
UNLESS OTHERWISE SPECIFIED:
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL
ANGULAR: MACH
BEND
TWO PLACE DECIMAL
THREE PLACE DECIMAL
INTERPRET GEOMETRIC
PROPRIETARY AND CONFIDENTIAL
TOLERANCING PER:
THE INFORMATION CONTAINED IN THIS
MATERIAL
DRAWING IS THE SOLE PROPERTY OF
-
WALTHER PLUG; IEC 309-2, 3-POL, 20A 250VAC
Outlet LED: Each outlet LED illuminates when the associated
<INSERT COMPANY NAME HERE>. ANY
FINISH
REPRODUCTION IN PART OR AS A WHOLE
NEXT ASSY
USED ON
-
WITHOUT THE WRITTEN PERMISSION OF
<INSERT COMPANY NAME HERE> IS
APPLICATION
DO NOT SCALE DRAWING
PROHIBITED.
outlet is ready to distribute live AC power. The IEC-60320-C19
2
outlets are arranged in pairs, and there are 2 LEDs below each
D
pair. The LED to the left
C
. The LED to the right
B
D
. Other outlet types have an LED
outlet.
Digital Load Meter (Ammeter): The total connected equipment
A
load is displayed on the meter
B
multiple outlet banks can also display the connected equipment
load for each outlet bank. Use the mode selection switch
display the total load (all bank LEDs
for each outlet bank (corresponding bank LED illuminated).
Circuit Breaker: If the connected equipment load exceeds the
Maximum Load Rating of the PDU, the circuit breaker will trip.
Disconnect excess equipment and allow the breaker to cool
before depressing the plunger to reset the breaker. Models with
multiple outlet banks have a circuit breaker for each bank.
C14 Plug-Lock Inserts: Use the included C14 plug-lock inserts
to secure plugs to C13 receptacles. Attach the sleeve to the
plug making sure the pull tabs remain outside the plug and that
the fit is secure. To unplug equipment properly, use the pull tabs
to remove the plug and insert from the receptacle.
C20 Plug-Lock Inserts: Use the included C20 plug-lock inserts
to secure plugs to C19 receptacles. Attach the sleeve to the
plug making sure the pull tabs remain outside the plug and that
the fit is secure. To unplug equipment properly, use the pull tabs
to remove the plug and insert from the receptacle.
D
C
B
NAME
DATE
A
DRAWN
TITLE:
CHECKED
PLUG; IEC 309-2,
ENG APPR.
MFG APPR.
3-POL, 20A
Q.A.
COMMENTS:
250VAC
SIZE
DWG. NO.
REV
C
SCALE: 1:1 WEIGHT:
SHEET 1 OF 1
1
is associated with the upper outlet
A
is associated with the lower outlet
C
E
A
in amperes. Models with
C
5
directly below each
B
to
illuminated) or the load
10/13/2017 12:17:02 PM
Publicidad
Capítulos
