Celestron StarSense EXPLORER DX 102AZ Guía De Instalación Rápida página 4

Attaching the
Smartphone
Your First
Night Out
4 | ENGLISH
1 1
Remove the large cap covering the mirror on the front
of the StarSense dock.
Congratulations! Your telescope is now set up
and you are ready to explore the cosmos. Take the
telescope outside, insert your 25 mm eyepiece,
remove the lens cap, insert your smartphone into the
holder, and launch the StarSense Explorer app. The
tutorial in the app will walk you through the steps on
fi nding your fi rst astronomical target.
For more information on this product, please visit the respective product page
on celestron.com
SOLAR WARNING:
Never attempt to view the sun through any telescope without a proper solar fi lter.
Need assistance?
Contact Celestron Technical Support celestron.com/pages/technical-support
03-20
2 2
Pull open the spring loaded slider on the top of the
phone dock and set the phone into the holder so
it is fl ush with the bottom lip of the phone holder.
Slowly release the slider to secure the phone in
place. Most phones fi t into the dock with the case
on. However, you may need to remove your phone
case if it is especially bulky or unable to fi t into the
clamp (i.e. folio style cases).
www.celestron.com/pages/warranty