TaoTronics TT-BA07 Manual Del Usuario página 7

indicator ashes red and blue alternately). After
approximately 30 seconds, the pairing will be done (LED
indicator in solid blue).
Pair in RX mode:
Press and hold the Power Button of the adapter for 5 seconds
(LED indicator ashes blue slowly). It will start pairing 5 seconds
after being powered on (LED indicator ashes red and blue
alternatively).
1. Activate the Bluetooth function on your phone and search
for the nearby Bluetooth devices:
• For iOS: Settings > Bluetooth > On
• For Android: Settings > Wireless & Networks > Bluetooth:
On > Scan for devices
2. Find "TaoTronics TT-BA07" in the search results and tap on it to
connect. Once connected, the LED indicator will turn solid blue.
Note:
• The adapter enters pairing mode automatically when
powered on for the rst time.
• The original pairing memory will be cleared after a mode
switch. It will automatically start pairing each time it's
powered on.
• If a PIN code is required for pairing, try 0000 (four zeroes),
8888 (four eights), 1111 (four ones), or 1234.
• The adapter can remember previously paired devices and
will attempt to pair with devices automatically, without going
into pairing mode.
Pair with two devices at the same time
In TX mode:
In TX mode, the adapter is able to pair with two Bluetooth stereo
earphones/speakers at the same time.
1. Follow the previous instructions in the "Pairing" section to pair
the TT-BA07 with your rst device.
2. Turn off the Bluetooth function on your rst device, tap the
Power Button twice to pair and connect to your second
device.
3. Turn on the Bluetooth function on your rst device. In
approximately 30 seconds, the second device will
automatically connect in.
Note:
• When you pair with two devices, both can play music at the
09/10