Technical Data - IKEA FRAMTID Manual De Uso

ENGLISH
Problem
The flame is blowing out im-
mediately after lightning
The gas ring burns unevenly
If there is a fault, first try to find a solution to
the problem yourself. If you cannot find a
solution to the problem yourself, contact the
After Sales Service (refer to the Service
chapter).

Technical data

Hob dimensions
built in height
Rating Plate
Made In Italy
© Inter IKEA Systems B.V. 1999
902-007-02
21552
PQM
PNC. 949630423 TYPE H7MF5TS0-G/VI
ZO 0694
The graphic above represents the rating
plate of the appliance (without serial num-
ber which is generated dynamically during
the production process), which is located at
its underneath surface of the casing.
Possible cause
Thermocouple is not heated
enough
Burner crown is blocked with
food residues
width
depth
After lightning the flame,
keep the knob pushed for
about 5 sec.
Check the main injector is
not blocked and the burner
crown is clear of food parti-
cles.
If you operated the appliance wrongly,
or the installation was not carried out
by a registered engineer, the visit from the
customer service technician or dealer may
not take place free of charge, even during
the warranty period.
744 mm
510 mm
30 mm
G20 20 mbar = 12 kW
G20/G25 20/25 mbar = 12 kW
G30 28-30 mbar = 858 g/h
G31 37 mbar = 843 g/h
G30/G31 30/30 mbar = 858 g/h
G130 8 mbar = 11.7 kW
Dear Customer, please apply here aside
the sticker you can find in the dedicate
plastic bag inserted inside the hob packag-
ing. This will allow us to assist you better, by
identifying precisely your hob, in case you
will need in future our assistance. Thank you
for your help!
Remedy
II2H3+ (IT-ES-PT)
III1c2E+3+ (FR)
II2H3B/P (BG-CZ-HR-RO-SK-TR)
~
230 V 50 Hz
9