Microsoft Surface Hub
Rolling Stand Assembly and Mounting Guide (55"/84")
Important safety warnings
Before assembling and mounting Microsoft Surface Hub on the rolling stand, read these important safety warnings.
This symbol identifies safety and health messages in this Device Guide
WARNING: Read safety and health information
Read this guide for important safety and health information. Keep all printed guides for future reference. Failure to follow instructions and properly set up, use, and care for this product can increase the risk of serious injury or death, or damage
to the device or devices. For an online version of this guide and additional support, safety and health information go to: www.surface.com/support/surface-hub.
WARNING: Installation experts – knowledge
Improper handling or installation could result in injury or death. To avoid hazards related to improper installation, ensure the installation is performed by people who have read and understand the installation instructions prior to beginning. If
you do not have the necessary equipment or expertise, consult a professional installer.
WARNING: Minimum number of installers
In order to reduce the risk of injury, the Microsoft Surface Hub 55" requires a minimum of two people and Microsoft Surface Hub 84" requires a minimum of four people to perform the installation.
WARNING: Handling and site preparation
Do not attempt to install the device with fewer than the required number of people. To reduce the risk of injury due to the size and weight of the device, keep the device upright. When placing the device onto the mount, be certain it is properly
seated before releasing it. Keep the assembly area clear of packing materials. Remove materials after each step.
WARNING: Designated load capacity
Rolling stands are rated for a designated load capacity. To reduce risk of personal injury, death, or damage to the device, never exceed the designated load capacity of the rolling stand. Refer to the specification section for weights andload
capacities.
WARNING: Tip-over and fall hazard
The rolling stand is designed to handle the weight of the device. To reduce the risk of injury or death, never allow anyone to hang from the unit. Never allow suspending anything other than the designated device.
WARNING: Do not attempt to repair or modify
Assemble stand components using only fasteners provided by Microsoft as shown on the parts list. Do not attempt to take apart, open, service, or modify the product, accessories, or power supply. Doing so could present the risk of electric
shock or other hazard. Any evidence of any attempt to open and/or modify this device, including peeling, puncturing, or removing any of the labels, will void the Limited Warranty. Heed all warnings and follow all instructions.
WARNING: Electrical outlet location
To reduce risks related to electric shock, ensure that there is an appropriate electrical outlet within reach of the power cord provided with the Surface Hub. Do not use extension cords, or a power cord other than what is provided with the
display assembly.
WARNING: Before you begin
To minimize risk of improper installation, before you begin the assembly and installation process, ensure that all of the proper hardware and parts have been provided according to the parts list. Never use hardware other than what is provided
by Microsoft and designed specifically for this product.
K
EN
1