Control Supervisor Object, Class 29 - WEG DeviceNet Drive Profile MVW-01 Guía De Instalación, Configuración Y Operación

1.8.8 Control Supervisor Object, Class 29

Atributos de la Instancia 1
Atributo Acceso
3 Get/Set Run 1
4 Get/Set Run 2
5 Get/Set NetCtrl
6 Get State
7 Get Running 1
8 Get Running 2
9 Get Ready
10 Get Fault
12 Get/Set Fault Reset
13 Get Fault Code
15 Get Crt From Net
Nombre
Run forward
Run reverse
0 = Local Control
1 = Control from Network
0 = Vendor Specific
1 = Startup
2 = Not ready
3 = Ready
4 = Enabled
5 = Stopping
6 = Fault Stop
7 = Fault
Running forward
Running reverse
0 = Other State
1 = Ready or Enabled or Stopping
0 = No Faults Present
1 = Fault Occured
0 = No Action
0 → 1 = Reset Fault
If fault is active, this atribute
indicates the code for the fault. If
fault is not active, it indicates the
last error code.
0 = Control is local
1 = Control is from Network
Guía DeviceNet Drive Profile MVW-01
hex
Descripción Padrón Tipo
BOOL
BOOL
BOOL
UINT8
BOOL
BOOL
BOOL
BOOL
BOOL
UINT16
BOOL
MVW-01 | 27