Charging The Battery - Samson Expedition excape + Manual Del Usuario

Charging the Battery

The Escape+ has an internal, rechargeable
battery capable of up to 20 hours of
continuous audio on a full charge.
Even though the system may have some
charge when first taken out of the box, it is
recommended to fully charge your Escape+
before first using the system.
To charge the battery:
• Set the power switch to the "OFF"
position.
• Connect the Expedition Escape+
to an AC power outlet using the
included power adapter.
• Keep the system plugged in until
the Power Supply indicator turns
off, indicating the battery is fully
charged.
If you find that the operation time of the Escape+ becomes noticeably decreased, even after
fully charging, the battery should be replaced. Contact Samson customer service or your
local distributor for a replacement battery.
The Escape+ utilizes a sealed lead-acid gel cell battery.
!
When not in use, the battery will slowly self-discharge. If
you are planning not to use the Escape+ for a long period of
time, it is advised to fully charge the unit before storing.
It is also important to charge the unit every six months when not used.
This will ensure a healthy battery and extend its life. If the battery
is left with a very low charge for an extended period of time, it is
possible to recharge the battery to working condition, but the charge
time can take up to 72 hours.
Expedition Escape+ • Portable PA System 7