Getting Started; Turn On Watch (First-Time Use Only) - Oregon Scientific RA126 Manual Del Usuario

GETTING STARTED

1
2
3
４
5
6
7
8
9
1. : Stopwatch is shown or running
2. : Alarm is set; will flash when activated
3. : Smart indicator to lower values
4. " ": Directional arrows indicates your position
5. : Master digits: i.e. Time
6. : Minor digits: i.e. Stopwatch
7. : Smart indicator to return / quick confirm
8. Cardinal direction
9.
calibrating the compass
10
10. : Sub-mode page indicator
11. : Indicates bearing tracking system in switched
11
ON
12
12. : Press ST / SP / + to increase values
13. : Keypad lock activated
14. : Low battery
13
15. Smart indicator
14
15
16. : Keypad tone is turned OFF
16
17. :Temperature icon
GETTING STARTED
17

TURN ON WATCH (FIRST-TIME USE ONLY)

Press and hold any key for 2 seconds to activate the LCD
display.
GETTING STARTED
The watch uses a 1 x CR2032 lithium battery, which has
already been installed. See below for battery warnings.
LOW BATTERY
ICON
3
: Indicates which way to turn the watch when
DESCRIPTION
The watch battery is low.