Replacing Fuse; Connecting The Microphone - Midland M Zero Manual Del Usaurio

PA EXT
ANT
13,8V DC
Mount in position with bolts, lock washers and nuts or self-threading
screws. You can install this transceiver in any location where 12,6 Vdc ±
10% power is available. Insert the power cable with lighter plug into the
vehicle's cigarette lighter cord. Before operation, you must install and
connect your antenna system. The lead from the antenna you've installed
should be connected to the antenna coaxial connector. If you are using
an external speaker, connect it to the EXT-SPKR jack.

REPLACING FUSE

If you replace the fuse for DC Power Cord, use 2 A type (one is supplied
as spare). Hold the fuse holder and press on the inside, then rotate the
holder.

CONNECTING THE MICROPHONE

Your transceiver has a new microphone connector. This ensures that you
won't accidentally pull out or loosen the plug connection when moving
the microphone cable out.
6 | M Zero Instruction Guide