Cabinet Installation - Thermador Professional PH Serie Instrucciones De Instalación

Ocultar thumbs Ver también para Professional PH Serie:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

The hood can be installed under a
cabinet by supporting the hood
from the top.
Note: The cabinet must be
structurally joined to the wall
studs to support the weight of
this hood.
Figure 10 shows the four (4) screw
holes (K) used for mounting the
hood to the bottom of the cabinet.
Make sure both knockouts have
been removed.
1. In the base of the cabinet drill
1/8" tap holes (See Dimension
A in Figure 10 and in Table).
Screw in four #10 x 1" screws
(provided with hood) leaving 1/4"
exposed).
2. If the hood is installed for
vertical discharge, use Figure 11
to create clearance holes for
passage of the transition and
conduit (See Dimension B in
Figure 11 and in Table).
3. For horizontal discharge use
Figure 5 for the geometry of the
cutout required for clearance of
the transition.
4. Hang hood from screws and
tighten securely.
5. From inside of hood, insert
screws supplied. Drill through
holes (use #8 x 5/8" screws
supplied), one (1) on each side
and four along the front, into
bottom of the cabinet. See
screw holes labeled "L" in
Figure 10.

Cabinet Installation

K
-9
1
/
"
16
Figure 10: Tap Hole and Screw Hole Locations
Centerline Hole Dimensions for Figures 10 and 11
HOOD
SIZE
30"
36"
42"
48"
54"
1 -1/8"
Wall
Cooktop
Centerline
Plan View of Cabinet Cutout
Note: This figure depicts transition and conduit locations only. See Figure 1b,
page 4 for overall hood dimensions.
Figure 11: Transition and Conduit Locations
8
A: Tap Hole Locations
L
23"
L
L
Note: This figure depicts tap hole and
screw hole locations only. See Figure1b,
Page 4 for overall hood dimensions.
A (Fig 10)
B (Fig 11)
Tap Holes
Conduit Hole
-1
29
/
"
13
16
-1
35
/
"
16
16
41-
1
/
"
19
16
47
-1
/
"
22
16
-1
53
/
"
25
16
B
23"
7 7/8"
2 3/8"
5/8" DIA clearance
3 -3/16"
holes for 1/2" conduit
to j-box.
K
-7
/
"
16
7
/
"
16
-7
/
"
16
-7
/
"
16
-7
/
"
16
2 -3/8"
1- 7/8"

Publicidad

Tabla de contenido
loading

Tabla de contenido