Honeywell RTH2310 Manual De Uso página 15

To modify the schedule (cont'd)
4) While the time display is flashing, press
to set the time (in increments of 15 minutes).
P#
5) Press .
6) While the temperature display is flashing, place
the System switch on Heat and press
to set the heat temperature. Place the System
switch on Cool and press
cool temperature.
7) Repeat steps 2 to 6 to set another period.
Exit
8) Press .
or
or
or to set the
13
RTH2310 Programmable Thermostat
Press to start programming
or to select another period
Press to select the days
Press to set the time
or the temperature
Place on Heat when setting
the heat setpoint or on Cool
when setting the cool setpoint
Press to erase (skip) the
displayed period
Press to end programming