Echo SRM-225 Instrucciones Para La Instalacion Del Conjunto página 4

4
20. Secure ignition leads against engine housing with clips (P,Q).
21. Install air filter and cover
Install Hip Pad
1. Attach hip pad to harness as shown.
Balance and Adjust Unit
1. Loosen harness clamp screw.
2. Put on harness and attach unit to harness.
3. Slide harness clamp (M) up or down until unit balances with head
approximately 50-75 mm (2 -3 in.) from the ground.
4. Tighten harness clamp screw.
5. Loosen upper U-Handle clamp screws (R), and position U-Handle
for comfortable operation.
6. Tighten U-Handle clamp screws and 8 mm clamp bolt securely.
NOTE
In case of Emergency, the trimmer/brushcutter can be released from
the harness by pulling up on the quick-release collar.
U-H K
andle it
i i
nstallation nstrUctions
P
Q
P
M
R