Tools, Parts And Materials; Tools Recommended For Installation - Whirlpool MMV5100AAW Manual De Instrucciones

OTR-Installation-M1.fm Page 4 Wednesday, September 27, 2000 4:03 PM

TOOLS, PARTS AND MATERIALS

Remove the microwave oven and all materials from the carton. To install
microwave over the range, you will need following materials and tools.
Check all materials and accessories before you begin installation. If you find
some parts missing, contact an Authorized Service Center.
Parts you need to install your oven
(You may not need to use all of these parts.)
• Upper Cabinet Template
• Wall Template
Power Supply Cord Bushing (1)
Use with metal cabinet.
1
x 3" Bolt and Washer
/ "
4
(2 each)
To secure to the upper
cabinet.
Grease Filter (2)

Tools recommended for installation

• Phillips screwdriver
• Pencil
• Measuring tape
• Clear tape
• Duct tape
• Electric drill
• Keyhole saw
3
• wood drill bit
/ "
8
1
1
1
x 2" Wood Screw
/ "
4
(4 screws)
Power Supply Cord Clamp
and Mounting Screw
(1 each)
To hold the power cord.
Mounting Plate (1)
Charcoal Filter (2)
Attached on back of microwave.
For room venting.
3
•
/
4
• Stud finder
• 2" diameter hole drill bit
• Hammer
• Caulk (wall venting)
4
1
x 3" Bolt and Spring
/ "
4
Toggle Heads (4 each)
For drywall holes.
Damper Assembly (1)
For roof/ wall venting
installation.
wood drill bit
"