Braun BLACK800 WiFi Manual De Instrucciones página 27

10. Password set up
Set the camera's power-on password. Open the menu and select "Password
Settings", and then press the OK button, set the switch to the "on" position,
set a 4-digit number between 0-9 or letter between a-z. When the first
position is set, press the MODE button to enter the next password setting.
After the setting is completed, press the OK button to return to the previous
menu. If you forget the power-on password, the default password of the
camera is: "1111", you can enter this password and make sure the mode
button is adjusted to the SETUP mode. The camera can now be unlocked.
11. Turn off WIFI automatically
Set the time of the camera to turn off automatically. Select the "turn off the
WIFI Automatically" option; press the OK button to open the menu for 1
minute/2 minutes/3 minutes. When the camera is in the monitor or SETUP
mode, after opening WIFI or finished use the APP and the phone is
disconnected from the camera, the camera automatically exits WIFI When
the camera defaults to "Automatically turn off the WIFI" time. Then the
camera will return to the ON or SETUP mode automatically.
12. Playback mode
12.1 Remove the camera from the installation position, switch the switch
from "ON" to "SETUP", press the MODE button to switch to the
playback mode, press the up/down button to view the captured picture
or video, press the OK button to start playing, and press OK again to
stop the video. During playback, press the up button to fast forward 2
times, 4 times, 8 times; press the down button to rewind -2 times, -4
times, -8 times. If you do not want to play the current video during
playback, press the MODE button to exit the current playback.
12.2 Delete/Lock protection
In playback mode, long press the down button to pop up the delete window:
Delete:
8