Braun BLACK800 WiFi Manual De Instrucciones página 32

Working mode description
1. Aligning the camera
In the test (SETUP) mode, you can calculate the optimal shooting angle and
camera range of the camera.
1.1 During alignment consider whether the use of the side motion sensors
may be useful for attaining the desired observation results.
1.2 Align the camera as follows:
1.2.1 Fasten the camera to a tree or similar object at a height of 1-2 meters
and align the camera in the desired direction. Then move slowly from
one side of the target area to the other side. While doing this, monitor
the motion display LEDs.
1.2.2 If this lights up in blue, you have been detected by one of the activated
side motion sensors. If it lights up in red, you have been detected by
the front motion sensor. In this way, you can work out the best
alignment for the camera.
1.2.3 The motion display only lights up when operating mode selector
switch is in the SETUP position and one of the motion sensors has
detected movement. During normal operation, there will be no LED
display in this area.
1.2.4 Make sure that the camera is not subject to unnecessary interference
while it is working. Keep away from direct sunlight, hot objects or near
branches. The sensor's detection range is about 120 degrees, and
the lens can shoot about 90 degrees.
13