Descargar Imprimir esta página

Important Warning - Chicco Good Night Instrucciones De Uso

Ocultar thumbs Ver también para Good Night:

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 10
CHICCO GOOD NIGHT
GB

IMPORTANT WARNING

• IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY
BEFORE USE AND KEEP THEM FOR FUTURE REFERENCE.
FOR YOUR CHILD'S SAFETY, READ THESE INSTRUCTIONS
CAREFULLY.
• WARNING: BEFORE USE, REMOVE AND DISPOSE OF ALL
PLASTIC BAGS AND PACKAGING MATERIALS AND KEEP THEM
OUT OF REACH OF CHILDREN.
Warnings:
• WARNING: All the opening and adjustment operations of the
product, as well as the installation of the accessories, must be
carried out by an adult.
• WARNING: The cot is intended for use for children aged between
birth up to 4 years of age.
• WARNING: Do not close the cot when the child is inside the cot.
• WARNING: Before use, always ensure that the four sides of the
cot are locked, and that the open device of the cot is locked in
the open position, as shown in the instructions for use.
• WARNING: Do not use the cot if any part is broken, torn or
missing and use only spare parts approved by the manufacturer.
• WARNING! When folded store away from children.
• WARNING: Do not move the product when baby is in the cot.
• WARNING: Do not place more than one child at a time into the
cot.
• WARNING: Do not let other children play unattended close to
the cot.
• WARNING: Never place the cot onto a sloped surface with your
child inside.
• WARNING: Do not place the cot near walls or obstacles to
prevent the risk that the child may remain trapped.
• WARNING: Do not leave anything in the cot or place the cot
close to another product, which could provide a foothold or
present a danger of suffocation or strangulation, e.g. strings,
blind/curtain cords etc.
• WARNING: the cot should be kept away from trailing cords and
flexes: Do not place the cot near windows, strings, curtains or
similar objects to prevent the risk of suffocation and/or chocking.
To prevent the risk of chocking, do not give to your child, or place
near it, any objects with strings.
• WARNING: Be aware of the risk of open fire and other sources
of strong heat, such as electric bar fires, gas gires, etc. in the near
vicinity of the cot.
• WARNING: Thickness of the mattress shall be such that the
internal height (surface of the mattress to the upper edge of the
cot frame) is at least 50 cm in the lowest position of the base
(diag. 8A).
• WARNING: The mattresses should be not less than 116 cm in
length, 58 cm in width and not more than 119 cm in length and
61 cm in width. An additional mattress should not exceed 10 cm
in height.
• WARNING: Prolonged exposure to direct sunlight may cause
the fabric to fade. After prolonged exposure of the cot to high
temperatures, wait a few minutes before placing the child into it.
• WARNING: Do not use more than one mattress in the cot.
• WARNING: When the child is able to climb out the cot, the cot
shall no longer be used for that child.
Care and Maintenance:
The cleaning and maintenance of this product must be carried
out on a regular basis by the user. The cleaning and maintenance
of the product must only be carried out by an adult. The cover is
not removable: Clean the cover with a damp sponge and neutral
detergent. Do not use solvents or abrasives.
• Periodically clean the plastic components of the cot with a damp
cloth.
• Dry the metal parts to prevent the formation of rust.
• Check the cot periodically for signs of damage or wear. Should
any part be damaged, do not use the product.
• The cover of the cot is not removable: Clean with a damp sponge
and neutral detergent.
INSTRUCTIONS FOR USE
COT COMPONENTS
a) Cot (see diagram 5)
b) Mattress (see diagram 5)
c) Bag (see diagram 12)
How to Open the Product:
1. Remove the cot from the bag and place it in a vertical position,
with the corners upwards. Unfasten the Velcro straps (diagram 1)
and remove the mattress from the cot.
2. Hold the two short sides, located opposite to each other, and pull
them externally and in an upward direction, until they are locked
into position (diagram 2). A "click" will be heard, indicating that
the cot is opened correctly.
3. Repeat the above operation on the other two sides (diagram 3).
WARNING: To lock the side joints more easily, keep the cot's
feet as close together as possible.
4. Apply a little downward pressure with your hands in the central
section on both sides to make sure the four sides are firmly
locked in place. Now apply pressure to the centre of the bottom
of the cot (whilst lifting one of the long sides at the same time to
assist opening and locking). You will hear it click into place when
it is locked properly (diagram 4).
5. O n the base, you will find a safety handle that should be pressed
downwards fully until an audible click is heard. (The cot base
should be completely flat; diagram 4B). The secondary lock
prevents the cot being closed accidentally and cannot be
released whilst the child is in the cot.
6. Place the mattress on the bottom of the cot fastening the velcro
straps as seen in Diag. 6A-6B.
WARNING: Do not leave anything in the cot or place the cot
close to another product, which could provide a foothold or
present a danger of suffocation or strangulation, e.g. strings,
blind/curtain cords etc. The cot is now ready for use. The cot has
a netted window on both the long sides (see diagram 5).
How to Close the Cot:
7. Remove the mattress (Diag. 7). Release the second safety fixture
by pulling the tab found in the centre of the base upwards by
about 15 cm. (diag. 8)
8. Holding always raised the central handle with one hand, push
with the other hand the buttons located externally on the
central joints of the long superior sides (diagram 9). Raise them
slightly to unlock the safety device, and fold them in a downward
direction.
9. Repeat the above operation with the short inferior sides.
WARNING: if during the folding operation, the long inferior sides
should accidentally get blocked in open position, it is necessary to
manually unblock the long inferior sides.
WARNING! During this operation, ensure that the baby is at a
proper distance and pay attention to the mobile parts between the
tubes.
When this operation is finished, put the cot in a vertical position
raising it by the central handle.
10.Now grasp the tab in the centre of the base again and pull it
upwards as far as possible to bring the four legs together
(Diag.10).
11. W rap the mattress around the cot, and fix it with the velcro
straps (diagram 11).
12.Replace the Playard Cot Bed in its storage bag (diagram 12).
9

Publicidad

loading