Power Switch; Handle Position - Bissell PowerGlide Pet Bagged 3863 Serie Manual Del Usuario

O
perations
automatic cord rewind
1. Gently pull out power cord and stop when
yellow line is visible. Do not pull power
cord beyond the red line. Plug cord into
electrical outlet.
2. To return cord, turn vacuum power switch
OFF, and remove plug from outlet. Hold
plug and press automatic cord button to
wind cord into reel. Do not allow plug to
whip when rewinding.

power switch

the power switch is located just below the
handle on the side of the vacuum.
i -on

handle position

press the handle release pedal with foot
to place vacuum into cleaning
positions.
1.
upright: For storage, transporting, and above
floor cleaning with tools.
• Transport in upright position by tilting vacuum on
rear wheels and push forward or use
carrying handle on back of handle base.
2.
normal cleaning: Press handle release
pedal once for most household floor cleaning.
3.
low cleaning: From normal cleaning
position, press handle release pedal once for
cleaning under low furniture.
height adjustments
Turn dial on powerfoot to adjust to one of five
height adjustments. If dial is difficult to turn, tilt
the cleaner back slightly to take the weight off
the foot while turning.
lowest setting: For low pile carpet and
Medium setting: For medium pile carpet.
highest setting: For high pile and most shag
w w w . b i s s e l l . c o m
o- off
barefloors.
carpet. Adjust to high setting
if difficult to push.
8 0 0 . 2 3 7 . 7 6 9 1
7