Power Cord; Power Button - Bissell OPTICLEAN 42Q8 Serie Guia Del Usuario

O
perations

Power cord

The power cord is located at the rear of the
vacuum. Gently pull out the power cord,
watching for the yellow line. Stop pulling the
power cord once the yellow line is visible.
There is also a red line, which indicates the
end of the usable cord. Do not pull the power
cord out beyond the red line.

Power button

Turn the power ON or OFF by pressing lightly
downward on the power button (
Automatic cord rewind
Your vacuum is equipped with an automatic
cord rewind. When cleaning is finished, press
the power button OFF (
to disconnect from the electrical outlet. Hold
the plug and press the automatic cord rewind
button to rewind the cord automatically.
Variable suction power control
The variable suction power control panel is
located on the top of the vacuum. Press the +
button to increase suction. Press the – button
to decrease suction, for lightly soiled areas or
delicate fabrics.
WARNING:
To reduce the risk of electric
shock, turn power switch
OFF and disconnect plug
from electrical outlet before
performing maintenance or
troubleshooting checks.
w w w . b i s s e l l . c o m
).
)and grasp the plug
Automatic
Cord Rewind
CAUTION:
Be careful to avoid injury as
cord retracts very quickly.
Variable Suction
Control
CAUTION:
Before using your vacuum,
make sure that the dust bag
and all filters (pre-motor and
post-motor) are in place. Do not
operate your vacuum without
the dust bag and filters.
8 0 0 . 2 3 7 . 7 6 9 1
Power
Button
7