DENTAURUM CONTEC lc Modo De Empleo página 13

Tip for faster curing with metal brackets: Hold the light guide in the
interproximal area between two brackets. Shine the light on both sides
of the bracket to cure the adhesive completely.
Archwires can be fitted on the brackets immediately following curing on
the last bracket.
9. Warnings/Precautions
When using the light guide, follow the manufacturer's instructions
„ „
regarding handling, correct use and information on eye protection.
The above-mentioned curing times are valid for polymerization
„ „
lamps with a light intensity of at least 700 mW/cm². The light-curing
time may vary depending on the source of light and instructions
for use. The wavelength of the lamp must cover the range of
400 – 500 nm.
Make sure the material is at room temperature before it is used.
„ „
Close the lid of the syringe after use.
„ „
Standard medical gloves do not offer protection against the
„ „
sensitizing effect of methacrylate. Should the product come into
contact with the glove, remove the glove and dispose of it. Wash
your hands immediately with soap and water and put on new
gloves. Contact your doctor if you experience an allergic reaction.
EN
13