7.- USING THE HOOD
To fit the hood onto the frame of the hammock, slide it from
the top down to the corresponding slots on the central part.
Use the zip on the hood to join it to the frame.
hood off, follow the same procedure in reverse order.
Once the hood is fitted, its position can be adjusted by moving
the spokes to suit the angle of the backrest.
Insert the hood of the bottom hammock into the holes found
above the side buttons. It can also be folded down.
8.- ADJUSTING THE HANDLEBAR
The handlebar can be set to 7 different positions. Simulta-
neously press the buttons on both sides of the handlebar.
9.- SEAT BELT
Your pushchair has a safety harness to keep your child safe at
all times. Fit the belt onto the child whenever he is using the
pushchair.
19
32
10.- ADJUSTING THE FOOTREST
The footrest has 5 positions. Simultaneously press the two
buttons found on the bottom part of the hammock to turn
it downwards.
14
To take the
To move it upwards it is not necessary to press the button,
simply pull the footrest.
11.- USING THE PARKING BRAKE
PUTTING THE BRAKE ON: Push the lever downwards.
TAKING THE BRAKE OFF: Pull the lever upwards.
WARNING: When the brake is on make sure that the push-
chair has braked correctly. It may be necessary to push the
15
pushchair slightly for the brake to be fully activated.
12.- CENTRAL PROTECTOR
The central protector is a movable bar that lets you place the
child in the bottom seat more easily. After removing the main
hammock, open the protector by pulling the button on the
bottom of the side downwards and turn the protector out-
wards.
21-21a
16
18
18.a