Westinghouse 0101108 Instrucciones

WARNING: Risk of re or electric shock. Disconnect power to existing luminaire at breaker box. Luminaries' wiring,
ballasts, or other electrical parts may be damaged when drilling for installation of the converter kit hardware. Check
for enclosed wiring and components. Do not alter, relocate, or remove wiring, lampholders, ballasts, or any other
electrical components. Install in 4" to 6" recess can luminaires that have the construction features and dimensions
as shown in the drawings on page 2 of this instruction sheet. To prevent wire damage, do not expose wiring to edge
(Pop In Can)
CONVERT ALL OF THESE RECESSED CAN LIGHT PRODUCTS
Manufacturers
Halo
Lightolier
Lithonia
Juno
Progress
Thomas
Nora
L&C Lighting / Seagull
L&C Lighting / Utilitec
W.A.C.
Seohyun International / Quantus
Elite
Elco
Capri
Jimway / Cammercial Electric
Luminaire: LUICT-0
Prescolite
Utilitech
of sheet metal or other sharp objects. Mount only on listed new construction cans with
bar hangers. Do not use this product in a pop in can (see illustration). DO NOT install on
t-bar suspended ceilings. 50 lbs. max. load rating for luminaires. Not intended for lumi-
naires greater than 50 lbs. Note: This recess light converter kit is designed to support a
luminaire with a maximum weight that can be supported by your recess can or 50 lbs.,
whichever is less. Not intended for use with ceiling fan. The converter kit installation
requires knowledge of lighting luminaires electrical system. If not quali ed, do not
attempt installation. Contact a quali ed electrician.
Model No.
EI400AT, H99ICT, H99T EL99, H99ICAT,
H5ICAT, H5T, H5ICAT, ET500, EI500AT,
H25ICAT, H7T, HI7T, H7ICT, H7ICAT,
H7TNB, H7ICTNB, H7ICATNB, H27T,
H27ICT, H27ICAT, ET700, ET2700,
EI700U, EI700UAT, EI700AT, EI700NB,
EI700ATNB, EI2700, EI2700AT
1004IC, 1004ICN, 1004ICNQ, 1004ICQ,
1004SIC, 1004SICN, 1104IC, 1104ICN,
1104ICNQ, 1104ICQ, 1104SIC, 1104SICN
L3R6, L5, LC6, LCP, LU6, LUP, L7, L7X,
L7XP, LICJ
IC2, IC2W, IC20, IC20N, IC20S, IC20NW,
IC20W, IC21, IC22, IC22S, IC22W, IC23,
IC23W, TC2, TC2S, TC2W, TC20, TC20S,
IC1, IC1S, IC1W, IC1P, TC1, TC1S
P821-AT, P821-FB, P821-FBFC, P84-AT,
P85AT, P85-FB, P85-TG, P86-TG, P87AT,
P645-AT, P83, P88, P830-TG, P831-AT,
P831-FB, P816-TG, P817-AT
PS1, PS3, PS5SH, PS9, PS5, PS5, PS7IC,
PS4, PS4ASIC, R4, R4ASIC
NH-26Q, NH-27Q, NHIC-27Q, NHIC-
27QAT, NHIC-17/100/AT, NHIC-17QAT,
NHIC-17QNBAT, NHIC-17/100/DW,
NHIC-17/100/DWQAT, NH-501Q, NHIC-
501QAT, NS-401Q, NS-401QAT, NSIC-
401AT
1106, 1107, 1108, 1110,1128, 11028,
11019, 1119, 11007, 11107, 11128,
11119, 1105, 1179
LWSIC1
R5VI-ICA, R5VI-S-ICA, R6VI-ICA, R6VI-S-
ICA R-500-N-UA, R-602D-N-ICA, R-
600D-N-A, R-660S-N-A, R-402S-N-ICA,
R-400S-NA
82-200IC
B4, B4IC, B5IC, B5IC-AT, B6, B6IC,
B6ICAT, B26, B26IC
R5H, EL5IC, EL5ICA, EL7IC, EL7ICA,
EL7ICAT, EL7ICWA, EL7IC100,
EL7IC100A, EL99
R4, R4ASIC, R5, CR1, CR1QP, CR1NB,
CR1NBQP, R9ASIC, CR5, CR5QP, PR1
C7 (H5), C7IC (H1), C7ICA (H3),
HBR5000SIC (H21), CAT7ICATA,
HBR5ICAT, CER105, HBR2000BICAT,
HG2000BA
LUICT-00
BX5, IBX5, IBX5S, IBXHW, IBXS, FT5, FT6,
SCIBX, IBX4-120, BX4-120, FT4
Y7, Y7ICAT
PARTS INCLUDED
Part
1
Description
Metal Cover Plate (A)
Decorative Medallion (B)
Outer Section for
Channel Brace (C)
Inner Section for
Channel Brace (D)
Inner Lock Bar (E)
Crossbar Mounting Bracket (F)
#8-32 x 1/4" Center Screw (G)
#8-32 x 5/16" Side Screw (H)
Washer (I)
#8-32 x 3/16" Gound Screw (J)
Green Ground Wire with screw (K)
Bare Copper Wire (L)
Socket Pigtail (E26 Base) (M)
1" Self Piercing Screw (N)
#8-32 x 1/2" Fixture Screw (O)